| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002EXE00OX |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: SYSTEM DESCRIPTION (2008 Sequoia) | ||
|
Cellular Phone Voice Circuit between Radio Receiver and Stereo Component Amplifier |
SYSTEM DESCRIPTION
This circuit is used when the cellular phone voice in the "Bluetooth" handsfree system is on.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER) |
|
(a) Disconnect the I3 radio receiver assembly connector. |
(b) Disconnect the I17 stereo component amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
I3-11 (IVO+) - I17-15 (II1+) |
Always |
Below 1 Ω |
|
I3-12 (IVO-) - I17-14 (II1-) |
||
|
I3-11 (IVO+) - Body ground |
Always |
10 kΩ or higher |
|
I3-12 (IVO-) - Body ground |
(d) Reconnect the radio receiver assembly connector.
(e) Reconnect the stereo component amplifier assembly connector.
|
|
|